Showing 1–24 of 114 results

3M 91-AH 20-5N Heatshrink Kit. (91-AH 20-5N)

SAR 0.00
Heat Shrink Kit-Low voltage-For armoured and non armoured cable--

3M 91-AH 21N Heatshrink Kit. (91-AH 21N)

SAR 0.00
Heat Shrink Kit-Low voltage-For armoured and non armoured cable--

3M 91-AH 22N Heatshrink Kit. (91-AH-22N)

SAR 0.00
Heat Shrink Kit-Low voltage-For armoured and non armoured cable--

3M 91-AH 24N Heatshrink Kit. (91-AH 24N)

SAR 0.00
Heat Shrink Kit-Low voltage-For armoured and non armoured cable--

3M 91-AH 25N Heatshrink Kit. (91-AH 25N)

SAR 0.00
Heat Shrink Kit-Low voltage-For armoured and non armoured cable--

3M Cloth Tape P-4. (P4)

SAR 0.00
Restricting Tape- 1" x 30' on 1" core.-Restricting Tape- 1" x 30' on 1" core.---

3M Glass Cloth Electrical Tape 27 3/4″x66′- White- Rubber Thermosetting Adhesive- 3/4 in x 66 ft (19 mm x 20-1 m)- 50 per case. (27 3/4”)

SAR 0.00
7-mil woven insulating glass cloth tape with pressure-sensitive rubber thermosetting adhesive-Designed to operate in 600 volt dry applications requiring high mechanical strength and resistance to high temperatures-Adhesive is specially designed and prepared to provide corrosion protection-Edge-tear resistant- conformable- and abrasion resistant-For use as a coil cover- anchor- banding and core- layer and crossover insulation

3M Glass Cloth Electrical Tape 27. (27 1/2′)

SAR 0.00
7-mil woven insulating glass cloth tape with pressure-sensitive rubber thermosetting adhesive-Designed to operate in 600 volt dry applications requiring high mechanical strength and resistance to high temperatures-Adhesive is specially designed and prepared to provide corrosion protection-Edge-tear resistant- conformable- and abrasion resistant-For use as a coil cover- anchor- banding and core- layer and crossover insulation

3M Glass Cloth Electrical Tape 69 3/4″x66”- White- Silicone Adhesive- 3/4 in x 66 ft (19 mm x 20-1 m)- 50 per case. (80018003600)

Glass cloth tape with a high-temperature- thermosetting- silicone adhesive-Adhesive provides an increased bond once applied in areas of high ambient temperatures-Edge-tear resistant conformable- high-temperature flame resistant-For use as a coil cover- anchor- banding and core- layer and crossover insulation-Printable

3M Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301. (FP301-3/4/BLK)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-1-Yellow-50`: 50 ft spool length- 150 linear ft per case. (FP301-1/Y)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Expanded I.D. of 1 in-50-ft spool

3M Heat Shrink Thin-Wall Tubing FP-301-1.5-Black-100`: 100 ft spool length- 200 ft per case. (FP301-1.5/BLK)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-1.5-Blue-100`: 100 ft spool length- 200 linear ft/box. (FP301-1.5/B)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-1/2-Black-100. (FP301-1/2/BLK)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-1/2-Blue-100”- 100 ft Length per spool- 300 ft per case. (FP301-1/2/B)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-1/2-Green-100`: 100 ft spool length- 300 ft per case. (FP301-1/2/G)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-1/2-Red-100”- 100 ft Length spool- 300 ft per case. (FP301-1/2/R)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-3-Black-50”- Black- 50 ft Length per spool- 50 ft per case. (FP301-3/BLK)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Heat Shrink Thin-Wall Tubing FP-301-3/4-Red-50`: 50 ft spool length- 150 ft per case. (FP301-3/4/R)

SAR 0.00
Balances electrical- physical and chemical properties for various industrial and military applications-Offers shrink-fit protection and strain relief of wires- solder joints- terminals and connections-Suitable for lightweight wire-harness covering- fire-resistant covering- wire marking- wire bundling and component packaging-Made of flexible polyolefin-Withstands temperatures of -67 to 275 degrees F (-55 to 135 degrees C)

3M Scotchcast Inline Splice Kit 90A-01- 0 – 600 V- 10 Pieces/Case. (90A-01)

SAR 0.00
3M Scotchcast 90A-0x Series Inline Splice Kit is a 1 kV rated- rigid body splice designed to join power cables. It fits unshielded (or shielded with additional accessories) constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of electrical cables- underground systems- in weather exposed or direct burial applications.----

3M Scotchcast Inline Splice Kit 90A-02- 0 – 600 V- 10 Pieces/Case. (90A-02)

SAR 0.00
3M Scotchcast 90A-0x Series Inline Splice Kit is a 1 kV rated- rigid body splice designed to join power cables. It fits unshielded (or shielded with additional accessories) constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of electrical cables- underground systems- in weather exposed or direct burial applications.----

3M Scotchcast Inline Splice Kit 90A-03- 0 – 600 V- 1 Piece/Case. (90A-03)

SAR 0.00
3M Scotchcast 90A-0x Series Inline Splice Kit is a 1 kV rated- rigid body splice designed to join power cables. It fits unshielded (or shielded with additional accessories) constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of electrical cables- underground systems- in weather exposed or direct burial applications.----

3M Scotchcast Inline Splice Kit 90A-04- 0 – 600 V- 1 Piece/Case. (90A-04)

SAR 0.00
3M Scotchcast 90A-0x Series Inline Splice Kit is a 1 kV rated- rigid body splice designed to join power cables. It fits unshielded (or shielded with additional accessories) constructions of plastic or rubber jacketed cables. It is perfect for inline splicing of electrical cables- underground systems- in weather exposed or direct burial applications.----